Flashing HP Procurve 2824 (Firmware upgrade)

Connect with console cable (serial port)

Use Hyperterminal and connect to the specific serial prot

Start (Solar Winds) TFTP Server on your PC
- File
- Configure
- Start (to start the tftp server)

make sure the firmware is set to c:\tftp-root\ and that your root directory is set to that.

Copy newly downloaded firmware upgrades to c:\TFTP-ROOT\

on Switch

switch# conf t
switch(config)# ping 192.168.0.2 (of the machine used for the flash)
switch(config)# copy tftp flash 192.168.0.2 I_07_68.swi
switch(config)#The primary OS Image will be deleted, continue [y/n]

Copy tftp flash from your ip address specified with the filename as copied into the tftp-root directory. Select Y to delete primary OS.